In a poultry plant, the largest losses often hide in short, repeatable cleaning actions: belt sprays left open during breaks, crate washers running below useful impact, hot-water rinses doing cold-water jobs and manual hose work repeated because first-pass soil removal is inconsistent. Measuring energy and water saving starts with separating those functions, then proving that lower resource use still delivers the required hygiene result under production conditions.
The mistake is to compare utility bills before and after a project and call the difference a cleaning improvement. Utility bills include production volume, weather, maintenance events, boiler load, compressor demand and non-cleaning use. A defensible measurement method works at asset, line or process-step level, where plant managers and hygiene teams can see what changed.
Build an energy and water saving baseline before changing the cleaning method
Start with the current cleaning process, not the proposed solution. For poultry processing, the baseline should be specific enough to distinguish between conveyor belt cleaning, crate washing, shackle cleaning, filter cleaning, equipment rinsing and manual sanitation. Each function has different flow rates, soil loads, temperature requirements, labor input and hygiene risks.
A baseline does not need to be academically complex, but it does need to be repeatable. Record the same variables over comparable production days, with similar line speed, product mix, shift length and soil load. If the plant runs different bird sizes, marinaded products or seasonal throughput, note those conditions because they can change cleaning demand.
| Measurement area | What to record | Why it matters |
|---|---|---|
| Water | Volume, flow rate, pressure at point of use and open time | Shows whether savings come from lower flow, shorter runtime or better targeting |
| Energy | Pump power, hot-water demand, compressor load and conveyor runtime | Prevents shifting cost from water to electricity or compressed air |
| Labor | Manual cleaning time, operators required and re-cleaning time | Captures the operational cost of inconsistent cleaning |
| Hygiene result | Visual inspection, ATP, swabs or internal release criteria | Confirms that reduced resource use has not weakened hygiene control |
| Production impact | Downtime, line stoppages, disassembly time and access constraints | Links cleaning performance to available production time |
Define the measurement boundary first
A reliable energy and water saving calculation should state exactly where the boundary starts and ends. If the project concerns a belt washer, measure the belt washer and any associated pumps, heating, compressed air and wastewater effect. If it concerns a full sanitation shift, separate the main cleaning functions rather than averaging the whole site.
This matters because savings can be hidden or overstated when boundaries are vague. A nozzle upgrade may reduce water at one point but increase manual follow-up elsewhere. An inline cleaning system may use compressed air but reduce hot water, manual hose work and downtime. Only a clear boundary shows the net effect.
Keep factory cleaning KPIs separate from downstream storage or transport KPIs. If corporate reporting also tracks finished-goods logistics, those belong in another data stream, especially when handled by a specialist provider such as Gus Logistics' 3PL order fulfilment and warehousing services. Cleaning performance should be measured at the sanitation asset, production line or utility-meter level.
Measure water where it is actually used
For an energy and water saving project, plant-level water meters are useful for trend monitoring but too broad for technical decisions. Measure as close as possible to the cleaning function. Permanent sub-metering is ideal for major assets such as crate washers or central cleaning systems. Temporary clamp-on flow meters or calibrated inline meters can be sufficient for trials.
Pressure should be recorded at the cleaning device or manifold, not only at the pump discharge. Long pipe runs, restrictions, open parallel users and nozzle wear can change the pressure available at the surface. In practice, two systems with the same pump pressure can deliver very different cleaning impact.
For intermittent cleaning, record open time as well as flow rate. A hose or spray bar that runs at 60 liters per minute for 20 minutes has a different improvement potential than the same flow running continuously for 2 hours. On conveyors, record whether cleaning takes place during production, during breaks, at end-of-shift or after disassembly.
A useful water equation is simple:
| Variable | Formula | Use |
|---|---|---|
| Water per cleaning cycle | Flow rate x runtime | Compares repeated cleaning events |
| Water per production unit | Total cleaning water / throughput | Normalizes against production volume |
| Water per asset | Asset water use / operating or cleaning hours | Identifies high-impact equipment |
| Avoided water | Baseline water – new water use | Calculates measured reduction |
Measure energy as a net effect, not a single motor reading
The point of energy and water saving measurement is to understand the total resource movement around cleaning. In food plants, water and energy are often linked because water may be heated, pumped, pressurized, discharged, treated or moved through long pipework. Reducing water can therefore reduce more than the water bill.
For heated water, use measured gas, steam or electric heating data where available. If you need an engineering estimate, heating 1 cubic meter of water by 1 degree Celsius requires about 1.163 kWh before system losses. For example, a hot rinse that uses less water can reduce thermal demand, but the final calculation should account for boiler efficiency or measured purchased energy where possible.
Electric energy should include pumps, motors, conveyors, control systems and any new equipment added by the project. If compressed air is used, include compressor energy. This is especially important when evaluating microdroplet systems that mix water and compressed air under pressure. The calculation should compare the added air demand with reductions in water volume, water heating, pumping, wastewater and labor.
| Energy source | How to measure | Common mistake |
|---|---|---|
| Pump electricity | Power meter or motor kW x runtime estimate | Ignoring part-load operation |
| Heated water | Metered hot-water volume and temperature difference | Counting water savings but not heat savings |
| Compressed air | Compressor kWh, flow data or compressor control logs | Treating air as free utility capacity |
| Wastewater handling | Site wastewater volume and treatment cost allocation | Ignoring discharge cost and pumping |
Normalize results against production and soil load
The energy and water saving number should be normalized, otherwise a slow production week can look like a successful cleaning project. In poultry plants, practical denominators include liters per 1,000 birds, kWh per 1,000 birds, liters per crate, liters per meter of belt, labor minutes per sanitation area or water per operating hour.
Choose a denominator that matches the cleaning function. For a shackle cleaner, throughput and operating hours may matter most. For a crate washer, crates washed is more useful than total site production. For a belt application, belt width, belt speed, soil type and cleaning duration may explain more than daily tonnage.
Normalization also helps when plants compare lines, shifts or sites. A line with higher total water use may be more efficient if it runs higher throughput with fewer re-cleans. A smaller line may look efficient on total volume but perform poorly per unit produced.
| Cleaning function | Useful KPI | Why it works |
|---|---|---|
| Conveyor belt cleaning | Liters per meter of belt cleaned | Connects water use to belt surface area |
| Crate washing | Liters and kWh per crate | Matches utility use to washed units |
| Shackle cleaning | Liters per operating hour or per 1,000 birds | Reflects continuous contamination-control demand |
| Manual sanitation | Labor minutes per area or asset | Shows whether technology reduces manual workload |
| End-of-shift cleaning | Water, kWh and labor per sanitation window | Links cleaning to available downtime |
Protect the hygiene result during measurement
If energy and water saving is reported without hygiene verification, the number has limited value. A plant can always reduce water by cleaning less, but that is not the objective. The target is to reduce unnecessary resource use while maintaining or improving cleaning consistency.
Agree the hygiene acceptance criteria before the trial. Depending on the asset and internal quality system, this may include visual release, ATP testing, microbiological swabs, allergen checks where relevant, re-clean frequency or inspection records. Use the same criteria for the baseline and the new cleaning method.
Do not rely on one clean result from a light production day. Measure across normal operating variation, including heavier soil load, different shift teams, typical access limitations and realistic line speeds. For inline cleaning, confirm that the cleaning effect reaches the contact surfaces or risk areas that matter, not only the visible surface nearest the nozzle.
Hygiene teams should also track consistency. A method that slightly reduces average cleaning time but creates more variation between operators may not be a real improvement. Conversely, a targeted automated or semi-automated process can reduce dependence on manual technique, which is often valuable in plants with labor constraints.
Test cleaning technology under real production constraints
When testing Undine® or any other inline cleaning setup, energy and water saving must be verified against the existing process, not against a theoretical best case. IWC International's Undine® technology uses high-velocity microdroplets created by mixing water and compressed air under pressure. The practical purpose is to improve cleaning impact and targeting while using less water than conventional methods in suitable applications.
In poultry processing, this can be relevant for conveyor belts, crates, shackles, filters and other equipment where contamination control, repeatability and access are persistent concerns. The right setup depends on the process step, soil type, available pressure, line layout, space, control integration and hygiene objective.
Depending on the application, current cleaning method and production environment, IWC reports potential savings of up to 70% on water and energy consumption and up to 60% on labor costs. Those figures should always be treated as application-dependent. The measurement plan is what turns a potential into a plant-specific business case.
A practical trial protocol should define:
- The asset or line section included in the trial
- Baseline water, energy, labor and hygiene values
- Trial duration and production conditions
- Acceptance criteria for cleaning quality
- Net savings after compressed air, maintenance and operator input are included
For plants that are still mapping high-consumption assets, IWC has also outlined a practical asset-by-asset method for reducing water use in poultry cleaning.
Calculate gross savings, net savings and operational value
A credible energy and water saving report separates gross and net effects. Gross water saving is the reduction in water volume at the measured function. Net operational saving includes what changed around that function, such as energy, wastewater, labor, re-cleaning, downtime and maintenance.
Use measured data first and engineering estimates only where measurement is not practical. Label estimates clearly. This makes the report easier for operations, engineering, finance and procurement teams to review without debating every assumption.
| Value | Calculation | Notes |
|---|---|---|
| Water reduction | Baseline m3 – new m3 | Use the same production denominator |
| Thermal energy reduction | Reduced heated m3 x temperature difference x 1.163 kWh | Adjust with measured boiler or steam data where possible |
| Electric energy change | Baseline kWh – new kWh | Include pumps, conveyors, compressors and controls |
| Labor reduction | Baseline hours – new hours | Separate eliminated work from reassigned work |
| Downtime effect | Baseline cleaning window – new cleaning window | Convert to value only if production time can actually be used |
| Wastewater reduction | Baseline discharge – new discharge | Include treatment or discharge costs if known |
Avoid double counting. If labor time is reduced but the same team remains on site for the full shift, the immediate cash saving may be lower than the operational value. It may still matter if the plant can redeploy labor, reduce overtime, cover absences or shorten sanitation windows.
Connect the numbers to the investment decision
For capital approval, connect energy and water saving to operational constraints that managers already recognize: limited sanitation windows, rising utility cost, labor availability, wastewater capacity, maintenance workload and food-safety risk control. A cleaning investment is easier to evaluate when the technical result is translated into total cost of ownership.
The business case should include purchase and installation cost, integration with existing equipment, controls, maintenance, consumables, spare parts, operator training and any planned downtime for installation. If a solution can be installed in stages, measure the first application carefully before extending it to similar assets.
This is also where plant teams should compare the measured project with other improvement options. Lowering flow alone may reduce water but weaken cleaning impact. Increasing pressure may improve visible cleaning but raise energy use, misting, wear or manual handling issues. A targeted system should improve the balance between cleaning performance, resource use and operating reliability.
For a broader view of how utility savings affect sanitation economics, see IWC's article on how water energy saving improves cleaning economics.
Avoid measurement errors that weaken the case
Many cleaning projects fail to produce a convincing business case because the measurement method is too loose. The technology may perform well, but the evidence is not strong enough for multi-site rollout or budget approval.
Common errors include using only monthly utility bills, ignoring production volume, measuring during unusually light soil conditions, excluding compressed air, excluding re-cleaning, assuming pump pressure equals cleaning force at the surface and reporting water reduction without hygiene results.
Another frequent error is measuring only the sanitation team and not the production impact. If cleaning requires disassembly, access preparation or extended restart checks, those hours may sit outside the sanitation budget but still affect plant efficiency. The same applies to maintenance callouts caused by blocked nozzles, worn components or poor access.
A strong report states what was measured, what was estimated, what was excluded and why. It also shows whether the new process is stable enough for routine production, not only successful during a supervised trial.
Turn measurement into routine performance management
Measurement should not stop after the project is approved. Once the new cleaning method is installed, keep a small set of KPIs in routine management so drift is visible. Nozzles wear, pressures change, operators override settings and soil conditions shift. Without monitoring, savings can erode gradually.
Useful ongoing KPIs include water per cleaning cycle, kWh per cleaning cycle, re-clean frequency, sanitation window length, labor hours, pressure at critical points and hygiene release results. Review them with operations, hygiene, maintenance and engineering together. Cleaning performance sits between these departments, so the data needs shared ownership.
For multi-site poultry groups, a standard measurement template helps compare plants without forcing identical solutions. One site may need inline conveyor cleaning, another may need crate-washer optimization and another may need a custom approach for a hard-to-reach transfer point. The method should be consistent, while the technical solution remains specific to the application.
IWC International supports this type of practical evaluation by combining industrial cleaning technology, process expertise and custom solutions for poultry and food production environments. The strongest projects start with measured reality, then use that data to improve hygiene, reduce unnecessary resource use and protect production continuity.
FAQ's about how to measure energy and water saving in cleaning:
What is the best first step when measuring energy and water saving in cleaning? Start with an asset-level baseline. Measure water, energy, labor, runtime and hygiene results for the specific cleaning function before changing equipment or settings.
How long should a baseline period be? It should cover enough comparable production days to reflect normal variation in throughput, soil load, shift teams and cleaning conditions. A single test day is rarely strong enough for a capital decision.
Should compressed air be included in the calculation? Yes. If a cleaning technology uses compressed air, include compressor energy in the net calculation. This gives a fair comparison against water, hot-water, pumping, labor and wastewater reductions.
Which KPI is most useful for poultry processing? It depends on the application. Common KPIs include liters per 1,000 birds, liters per crate, liters per meter of belt cleaned, kWh per cleaning cycle and labor minutes per sanitation area.
Can a plant reduce water without compromising hygiene? Yes, but only when the cleaning process is properly targeted and validated. Reduced water use should always be measured alongside hygiene outcomes such as visual release, ATP results, swab data or internal quality criteria.
How should savings from Undine® technology be verified? Compare the Undine® setup with the existing cleaning method under similar production conditions. Include water, energy, compressed air, labor, downtime and hygiene performance so the result reflects the real plant environment.