by Team IWC | Jul 20, 2026 | Blog
In poultry plants, cross-contamination risk is usually not caused by a single failed hygiene step. It builds through repeated transfer: neck skin contacting guides, residues accumulating around open carcass areas, aerosols from poorly controlled wash points, shackles...
by Team IWC | Jul 18, 2026 | Blog
On poultry and food production lines, cleaning labor is rarely lost in one visible block. It disappears in repeated interventions: an operator holding a hose at a belt transfer, a sanitation team removing guards to reach the underside of a conveyor, a second pass...
by Team IWC | Jul 16, 2026 | Blog
In a caged layer environment, contamination control is often decided by small, repeated contact points: cage wire, manure belts, egg belts, drinker nipples, feed trough edges, belt returns, idlers and service tools. If these areas retain organic load between cleaning...
by Team IWC | Jul 14, 2026 | Blog
Atlanta-area poultry processors operate in a demanding corridor: high broiler volumes across Georgia and the Southeast, dense distribution into foodservice and retail channels, tight labor markets, and increasing pressure to show measurable reductions in water and...
by Team IWC | Jul 12, 2026 | Blog
In fruit and vegetable processing, the largest water losses rarely come from one obviously oversized washer. They usually sit in short, repeated intervals: spray bars running while no product is present, flumes that are refreshed more often than needed, conveyors that...
